صفحه کنترل

Tilt Switch Probe is an electromechanical tilt switch used to detect spot loss and feed loss on conveyor belt systems.

It controls the absence or density of the bulk material during the flow of the primary purpose fluids.

Uses:

  • High-level signal for silos and feeding funnels
  • High-level signal for stacking
  • Anti-blocking in loading / unload in areas of conveyor belts
  • Check for missing material on tape

Features:

  • All probe models are air tight, dust proof and waterproof
  • Compact probes should be used for applications where the area is limited and standardized
  • Heavy probes should be used for abrasion resistant applications
  • Simple installation and setup
  • Lower costs

Safety Features:

The probe option is made up of two different models. The other model with the SS model stainless steel body is used in compliance with complex casting and heavy conditions. The control unit can be directly integrated into the system.

Application Types

 
Control Panels Technical Specifications

 

Input

All models 115/230 VAC, 50/60 HZ
     
Alarm Contact

KT20-P

KT25-DIN

(2) SPDT—10 [email protected]/230 VAC,7 [email protected] VDC non-inductive

(1) NO—2 [email protected]/230 VAC, 3 [email protected]

Fault Contact All models

(1) NO- rated for 2 AMP

115/230 [email protected]

Delay Time All models 1,2,4, or 6 seconds selectable by jumpers
Temperature All models -40°C (-40°F) +50°C (+122°F)  
Protection

KT20-P

KT25-DIM

IP65 (NEMA 4)

IP20 (NEMA 1)

Certificate All models CE
Hazar dous Are a Use Awaiting Approval

Files